Shell CARNEA® E Oils
ISO Grades 10, 15, 22, 32, 46, 68, 100, 150, and 220Shell CARNEA® W Oils ISO Grades 10, 15, 22, 32, 46, 68, 100, 150, and 220
Shell DELIMA® Oils
ISO Grades 150, 220, and 320Shell HYPERIA® Oils
ISO Grades 220, 320, and 460Shell HYPERIA® S Oils
ISO Grades 220, 320, and 460Shell MORLINA® Oils
ISO Grades 100, 150, 220, 320, and 460Shell SPINDLE Oils
ISO Grades 10 and 22Shell TELLUS® Oils
ISO Grades 22, 32, 46, 68, and 100Shell TELLUS® T Oils
ISO Grades 15, 22, and 32Shell TURBO® T Oils
ISO Grades 32, 46, and 68Shell VITREA® Oils
ISO Grades 22, 32, 46, 68, 100, 150, 220, 320, and 460
Shell CARNEA E Oils are highly refined medium viscosity index (MVI) mineral oils with low natural pour points. They are economical oils for non-critical light and medium duty applications similar to those of VITREA® Oils. CARNEA E Oils are suitable for general purpose lubrication of bearings and lightly loaded gears -- particularly those with "once through" oiling systems, or where residence time is not long due to leakage loss.
Return to Bearing Lubricants
Shell CARNEA W Oils are highly refined medium viscosity index (MVI) mineral oils with low natural pour points. They are recommended where service temperatures are moderate and where long service life is not required. CARNEA W Oils are suitable for general purpose lubrication of bearings and lightly loaded gears -- particularly those with "once through" oiling systems, or where residence time is not long due to leakage loss.
Return to Bearing Lubricants
Shell DELIMA Oils are detergent, antiwear, rust and oxidation inhibited circulating oils. They are intended to provide machine cleanliness and to effectively disperse contaminants; yet provide rapid water separation in reservoirs -- a feature seldom found in detergent oils.
These barium free oils are designed specifically for use in paper making machines. They are especially effective in heavy duty service required for high temperature, high pressure kraft and board machines. In addition to application as circulating oils for bearings in paper machines, DELIMA Oils can also be used for reduction gears, gear-head motors, and hand- and ring-oiled bearings.
Return to Bearing Lubricants
Shell HYPERIA Oils are produced using highest quality synthetic (PAO) base fluids along with carefully selected additives. These products offer performance properties far superior to those of bearing and gear oils blended from conventional petroleum oils.
Shell HYPERIA Oils:
Shell HYPERIA Oils are designed for use in circulating oil systems with moderately loaded plain or roller bearings and in industrial gear reducer systems operating under lightly loaded conditions where these systems may encounter severe operating conditions, such as high temperatures, wide temperature ranges and long oil servicing intervals. These oils are particularly recommended for "sealed for life" systems.
Shell HYPERIA Oils help extend drain intervals, improve system cleanliness and reduce maintenance costs. They are compatible with the elastomers, gaskets, seals and paints that are normally used in systems designed for conventional mineral oils. Systems require no flushing before switching to HYPERIA Oils because of their compatibility with petroleum oils.
Return to Bearing Lubricants
Shell HYPERIA S Oils use the highest quality synthetic (PAO) base stocks available. These base fluids, coupled with carefully selected additives, offer performance far superior to gear oils that are blended from conventional base stocks.
Shell HYPERIA S Oils:
Shell HYPERIA S Oils are designed for use in industrial gear reducer systems that encounter high or wide ranging temperatures and heavy loading. These oils are also well suited for "sealed for life" systems. HYPERIA S Oils help extend drain intervals, improve system cleanliness and reduce maintenance costs. They are compatible with the elastomers, gaskets, seals and paints that are normally used in systems designed for conventional mineral oils. Systems require very little clean up before being switched to HYPERIA S Oils.
Return to Bearing Lubricants
Shell MORLINA Oils are manufactured from carefully selected, premium quality, paraffinic, high viscosity index base oils, and a combination of premium rust, corrosion and oxidation inhibitors. These oils exhibit excellent water separation characteristics and extremely low foaming tendencies.
Shell MORLINA Oils are intended for use in enclosed bath, splash and circulating systems. They are recommended for the lubrication of plain and rolling bearings, slides, machine tools and in low to normally loaded enclosed gear reducers where non-EP AGMA oils are specified. MORLINA Oils are appropriate where extreme pressure additives are not required, and where Shell VITREA® Oils are not sufficient. They meet the requirements of AGMA Grades 3 through 6. MORLINA Oil 150 is approved against Cincinnati Milacron Specification P-57.
Return to Bearing Lubricants
Shell SPINDLE Oils are manufactured with carefully selected, premium quality base oils and a premium combination of high quality rust, corrosion and oxidation inhibitors. These oils also exhibit excellent water separation characteristics and extremely low foaming tendencies.
Shell SPINDLE Oils are intended for use in the high speed spindle bearings found in some modern textile machines and other machine tools. These types of bearings may operate at extremely high rpm's, and they are likely to require low viscosity oils to lubricate properly and to dissipate excessive heat that may be generated. SPINDLE Oils may also be recommended for use in hydraulic systems that call for low viscosity, non-antiwear hydraulic fluids.
Shell SPINDLE Oils 10 and 22 are approved by Cincinnati Milacron against their specifications P-62 (10) and P-45 (22), and are so listed on their approved products list.
Return to Bearing Lubricants
Shell TELLUS Oils are antiwear hydraulic oils designed to give long service in high output hydraulic systems that use vane, piston or gear pumps. These oils help stretch oil and pump life in extended heavy duty service with their balance of excellent properties. Since they contain a zinc dithiophosphate antiwear agent, they should not be used in specialized pumps with silver plated bearing surfaces.
Shell TELLUS Oils are blended with specially selected paraffinic HVI base oils and incorporate a proprietary additive that is a leader in keeping systems clean. Shell TELLUS Oil technology is also a pioneer accomplishment because it is not adversely affected by small amounts of water. TELLUS Oil with this technology, was among the first anti-wear hydraulic oils to be approved under the Dennison HF-0 specification.
Shell TELLUS Oils:
Shell TELLUS Oils meet all requirements of major pump manufacturers that do not prohibit the use of zinc additives. They also meet the appropriate Cincinnati Milacron requirements. P-65 (TELLUS 32); P-70 (TELLUS 46); P-69 (TELLUS 68).
All TELLUS Oils are approved by the USDA for H2 use in meat and poultry processing plants where there is no possible contact between lubricant and edible product.
Return to Bearing Lubricants
Shell TELLUS T Oils are premium grade, very high viscosity index hydraulic oils designed for use in mobile and industrial equipment that is operated in a wide range of subarctic and temperate climates. In addition to outstanding low temperature properties, TELLUS T Oils offer the following:
Shell TELLUS T Oils are for use in:
Shell TELLUS T Oils are approved by the USDA for H2 use in meat and poultry processing plants where there is no possible contact between lubricant and edible product.
Shell TELLUS T Oils 15, 22 and 32 also meet a dielectric strength specification of minimum 25 KV, making them suitable for use in high voltage electric service vehicles.
Return to Bearing Lubricants
Shell TURBO T Oils are premium quality circulating oils designed to provide excellent lubrication of precision turbines in industrial and marine service.
Shell TURBO T Oil 32 is widely used for the lubrication of electrical power generation turbines. It has accumulated many years of excellent performance experience in major U.S. makes, including General Electric and Westinghouse turbines.
These oils are premium rust and oxidation inhibited oils for general plant bearing and gear lubrication. TURBO T Oils find application as turbine quality hydraulic oils, oxidation resistant circulating oils and as industrial gear oils for AGMA Grades 1 and 2.
Shell TURBO T Oils are qualified as "Rust and Oxidation Inhibited Hydraulic and Lubricating Oils" against the following Cincinnati-Milacron specification requirements. TURBO T Oils are also approved against MIL-H-17672D.
All TURBO T Oils are approved by the USDA for H2 use in meat and poultry plants where there is no possible contact between lubricant and edible product.
Return to Bearing Lubricants
Shell VITREA Oils are highly refined straight mineral oils that give excellent lubricating performance where rust, oxidation, or high bearing and gear loading are not problems. They have high viscosity indices, typically 90 to 100. These oils are recommended for lubricating plain and antifriction bearings and spur, helical and bevel gears operating under moderate loads and temperatures. They are excellent non-additive machine and bearing oils.
Return to Bearing Lubricants