Shell DENTAX® Gear Oil SAE 85W-90

Non extreme pressure transmission oil.
 

Shell DENTAX® S Gear Oil SAE 50

A synthetic transmission lubricant for use in automotive manual transmissions.
 

SpiraxShell SPIRAX® Heavy Duty Gear Oils SAE 80W-90 and 85W-140

Gear oils for automotive differentials and manual transmissions.
 
 

Shell SPIRAX® S Gear Oils SAE 75W-90 and 80W-140

Synthetic lubricant for heavy duty differentials and industrial gearing.

 

Return to top of page

PRODUCT DESCRIPTION


Shell DENTAX® Gear Oil

SAE 85W-90

Shell DENTAX Gear Oil, SAE Grade 85W-90 is a high quality mineral oil containing an oxidation inhibitor and a foam suppressant. This suppressant makes DENTAX a useful oil in small gear cases where foam could be a problem at high gear speeds.

  • Is a stable, non corrosive oil.
  • Provides ample lubrication of spur-type gears where an extreme pressure or antiwear oil is not required.


     Return to Gear Oils


    Shell DENTAX® S Gear Oil

    SAE 50

    Shell DENTAX S Gear Oil is a specially formulated, SAE 50, synthetic lubricant that was developed for heavy duty manual transmissions operating under severe conditions or requiring extended oil drain intervals.

    Shell DENTAX S Gear Oil gives excellent low temperature performance and high temperature stability for long service life. Dentax S is approved by Eaton for use in conjunction with Eaton Roadranger extended warranties.


    Return to Gear Oils


    Shell SPIRAX® Heavy Duty Gear Oils

    SAE 80W-90 and 85W-140

    Shell SPIRAX HD Gear Oils are extreme-pressure, multigrade, multipurpose gear lubricants for automotive differentials and manual transmissions.

  • Contain a sulfur-phosphorus additive system for excellent load carrying capacity
  • Minimize wear, protect against scuffing
  • Protect against rust, corrosion and foaming

    Shell SPIRAX HD Gear Oils are available in two SAE viscosity multigrades: 80W-90 and 85W-140. They provide MIL-L-2105D level performance and meet API service classifications GL-5 and MT-1. They also meet Mack GO-H requirements.

    Shell SPIRAX HD 80W-90, Shell's primary recommendation for passenger cars and light trucks, meets Chrysler, Ford, General Motors and imported car viscosity requirements.

    Shell SPIRAX HD 85W-140, Shell's primary recommendation for both on- and off-highway fleets, is especially suitable for heavy duty equipment or mixed fleets used in industrial or commercial applications.


     Return to Gear Oils


    Shell SPIRAX® S Gear Oils

    SAE 75W-90 and 80W-140

    Shell SPIRAX Gear Oils are heavy duty, synthetic lubricants that are formulated to meet the severe demands imposed by cold weather and high operating temperatures. In addition to the performance characteristics of SPIRAX HD, SPIRAX S Gear Oils excel in:

  • Low temperature performance
  • High temperature stability
  • Water separation
  • Resistance to viscosity loss by shearing

    Shell SPIRAX S Gear Oils meet the performance requirements of the following major specifications: API service classifications GL-5 and MT-1 Rockwell International specification 0-76-E (75W-90) and 0-76-B (80W-140); Eaton Axle division PS-037; Mack Truck GO-H GO-H/S; Dana Corporation, Axle Division; General Electric D 50E9C; Harnischfeger (PH) 474; and MIL-L-2105D.


     Return to Gear Oils